Mac Otakara cited the new 10.5-inch iPad Pro with 247.5 mm height, 178.7 mm width and 6 mm compared to the current size of 250.6 mm x 174.1 mm x 6.1 mm. The 12.9-inch iPad Pro is said to be 280 mm high, 215 mm wide and 6.4 mm thick compared to the current dimensions of 305.7 mm x 220.6 mm x 6.9 mm.
These dimensions are accompanied by rumors suggesting that Apple plans to introduce a complete redesign with the 201
Mac Otakara also suggests that the 2018 iPad Pro models will not have a 3.5mm headphone jack, with Apple choosing to eliminate them.
iPhones did not have a headphone jack since it was removed in the iPhone 7, and Apple relied instead on Bluetooth devices like the AirPods along with Lightning-based headsets. Apple is not expected to ship the new iPad Pro models with a Lightning to 3.5-mm adapter, which would match the analysts' predictions that the adapter will not ship with the 2018 iPhones.
In the iPhone range, the headphone jack has been removed to improve water-resistance and make room for internal components such as a larger battery, the Taptic engine, and the rear camera system. It's not clear whether Apple faces the same space restrictions in the iPad Pro when introducing the TrueDepth camera system, or whether it's an alignment of the iPad and iPhone features.
Part of Mac Otakara reports that Apple will use a "diamond cut" for both the front and rear of the new iPad Pro models, which could mean the tablets might have a design similar to the iPhone SE with bevelled edges.
The Smart Connector on the iPads was reportedly moved sideways down near the Lightning connector, possibly requiring a new vertically aligned Smart Keyboard. It is not clear how a vertical smart keyboard would work, as it would probably be unstable in this orientation, especially for the larger iPad Pro.
Apple should make this change because Face ID only works if the iPad Pro is vertically aligned, [MacBook] Mac Otakara says that it is "impossible to release the lock with the main unit turned sideways. "Previous information from Mac Otakara suggested that Apple worked on the horizontal face ID for the iPad Pro, and clues to such a feature were discovered in iOS 12.
In addition to these changes to the iPad Pro, Mac Otakara also shared a bit of information about the rumored 6.1-inch low-cost iPhone. The site confirms earlier rumors that the device will use a "Full Active" LCD display from Japan Display. Full Active Panels allow Apple to downsize the bezels of the LCD iPhone and bring it in line with the two OLED devices.
Mac Otakara 's sources have also mirrored earlier reports, pointing to production difficulties for the 6.1-inch iPhone. When production started on the phone this month, Apple reportedly reported a 1 percent completion rate, indicating a delayed start of the device in November.
Morgan Stanley analyst Katy Huberty made a similar prediction earlier this week, suggesting that "LED Backlight Leakage" issues could lead to a one-month delay in production. Huberty's information showed that the delay was originally six weeks, so it is possible that Mac Otakara works with older data. Other sources, such as the Apple analyst Ming-Chi Kuo, expect no startup delays, so it is unclear what is going on with the 6.1-inch iPhone at this time.
Mac Otakara has a somewhat mixed track record of rumors, sometimes shares information that is just right and sometimes misses the mark. Although this information is fairly specific, these new details should be viewed with some skepticism until confirmed by secondary sources.