قالب وردپرس درنا توس
Home / Science / NASA's asteroid probe fired Bennu with a laser, and that's the result – BGR

NASA's asteroid probe fired Bennu with a laser, and that's the result – BGR



NASA's OSIRIS REx mission has been steadily advancing on the diamond-shaped space rock Bennu since the spacecraft arrived several months ago, but not everything went according to plan.

The stone ended far more Well, dirtier than originally expected by NASA. Bennu's surface is full of debris, which poses a challenge for the NASA team to decide where the probe must touch the asteroid to collect samples. With a laser instrument integrated into OSIRIS-REx, NASA can now examine in detail how dangerous the surface really is.

In a new blog post, NASA explains how they used a tool called OSIRIS-REx Laser Altimeter (OLA) to scan much of Bennu's interface. The instrument paints a 3D image of the hard surfaces from which the laser bounces off, giving NASA researchers a detailed look into the rocky surface of the asteroid.

Choosing a location where the probe can touch can ultimately determine whether the mission's most dangerous maneuver is a short touchdown and sample collection ̵

1; successful or failed. Placing in an area with too much debris could be catastrophic to the probe, causing damage to the probe and potentially jeopardizing one of its major objectives.

The asteroid's three-dimensional laser model gives the NASA team a bit more information about which parts of the asteroid look safer than others. Obviously, avoiding big boulders is central, but with so few seemingly "clean" spaces on Bennu, it's still a challenge to decide where to best collect a sample.

NASA still has plenty of time to make that decision. The probe is expected to remain in orbit around Bennu in 2019 before taking its riskiest turn. In the meantime, we are learning more and more about the strangely shaped asteroid, while OSIRIS-REx continues to forward data to Earth.

Source: NASA / University of Arizona / CSA / York / MDA


Source link