قالب وردپرس درنا توس
Home / US / PG & E customers could stay out of power until Wednesday

PG & E customers could stay out of power until Wednesday



Pacific Gas & Electric has grown its northern California power outage to nearly 1 million customers, which means that well over 2 million people are on dark Sunday.

Customers Without Electricity May Remain in the Dark Until Wednesday Utility said Sunday.

PG & E has shut off residential power to prevent fire from electrical wiring. The Sunday failures are by far the largest of these failures, and many parts of the Bay Area, the Wine Country, the Delta, and the Sacramento Valley are under blackout conditions.

PG & E announced that it shut down its power supply for 940,000 customers on Sunday afternoon. According to Mayra Tostado, spokeswoman for the utility company, it is an electricity meter intended for residential or business use.

The blackouts are carried out in seven phases. So far, the company has completed five of the phases, two more still have to be completed the next day.

The next outage will hit approximately 636 customers in Kern County. A seventh phase will see more customers in the counties of Frenso and Madera.

The power outages started at 1

7.00. Saturday and will not end until the company finds that the failure areas are free of dangerous wind conditions, she said. "We continue to monitor the weather," she said. The current conditions are expected to last until Monday. When the wind abates, the power company can move faster to restore power.

As soon as the wind abates, PG & E sends thousands of electricians to visually inspect all lines for possible damage before the power can flow over them again. The company is soliciting 1,000 electrical workers who are part of the mutual assistance system from outside the state to help with inspections all the way to Florida. All crews will use the lines and use helicopters and drones, she said.

The utility company warns it could take up to 48 hours for the winch to subside to complete the inspections and re-enable the lines. Based on current weather forecasts, this means that customers may be out of power and inspections approved by Wednesday after the winch wears off.

"Some customers may see electricity earlier," she said. Tostado said if the utility would start inspections before the winds stop, it would only have to do a second inspection later.

They came when a new fire broke out in the Bay Area. It erupted near the Carquinez Bridge, which connects the Contra Costa district with Vallejo in northern California and spread rapidly south of Carquinez Street. Officials demanded an evacuation warning for all of Crockett, an unincorporated community with about 3,000 residents on the northwestern edge of the County of Contra Costa. Evictions were ordered for the southern half of the city south of Pomona Street.

Barriers are a relatively new and controversial strategy to reduce the risk of fires caused by electrical wiring such as the Weinland and Paradiesinfernos . Also on Saturday, about 90,000 additional residents of Sonoma County, from Healdsburg to Bodega Bay and the Pacific Coast, were instructed to evacuate .

The duration of the Bay Area-known extreme wind event as Diablo Winds was predicted to be approximately 36 hours from Saturday night to 8 pm in Monday morning with occasional gusts of 65 to 80 miles per hour in the highest peaks in North Bay. On Sunday morning, the gusts of wind near Healdsburg, threatened by the massive Kincade fire in Sonoma County, peaked at 150 km / h.

This is definitely an event we call historical and extreme The Monterey office of the National Weather Service, which manages forecasts for the Bay Area.

Not only the wind blows badly, the air is also quite dry – the relative humidity is expected to be between 15% and 30%. Everything in the teens and twenties is really dry, King said.

(Function (d, s, id) { var js, fjs = d.getElementsByTagName (s) [0]; if (d.getElementById (id)) {return;} js = d.createElement (s); js.id = id; js.src = "http://connect.facebook.net/en_US/sdk.js"; fjs.parentNode.insertBefore (js, fjs); } (document, & # 39; script & # 39 ;, & # 39; facebook-jssdk & # 39;));
Source link